Odpojovač baterie akumulátoru při podpětí, relé 10A, voltmetr

240,- Kč s DPH
198,- Kč bez DPH

66 / 13  Odpojovač chrání baterii / akumulátor 12V při vybíjení. Vybíjení pod hranici 10,5V akumulátor nenávratně poškozuje. Tomu zabrání tento odpojovač a prodlouží tak životnost akumulátoru. Max. proud relé: 10A.

Features:

  • This is a under-voltage switch module used to turn off the power of resistive load in the event of the voltage dropping below a definite value(set under-voltage).
  • If the voltage rises back in 6 seconds, the module will keep load turning on.
  • When the battery voltage increases to a certain value(set over-voltage), the module will automatically turn on load again.
  • Designed with a LED indicator to show if load is cut off or turned on.
  • Both under-voltage cut-off value and over-voltage turn-on value can be adjusted by simply pressing buttons.

Specifications:

Input Voltage: DC12V
Max. Current: 10A

Size: 50*48*20mm/1.96*1.89*0.78"

Instruction:

Load cut off and turn on:
For 12V storage battery, set under-voltage (load cut off voltage) as 10.5V, when the battery voltage drops to 10.5V or lower, controller will delay 6 seconds then cut off load. If voltage increases in the delayed 6 seconds, load will keep turning on.
Voltage setting:
Under the value setting condition as display flashes,
press start button to increase voltage,
and stop button to reduce voltage.
Start button function(setting under-voltage for cutting off load):
Under normal voltage display condition, press start button to display under-voltage value.
Press and hold start button till display flashes, then press start or stop button to set under-voltage value.
Stop button function(setting over-voltage for turning on load):
Under normal voltage display condition, press stop button to display over-voltage value.
Press and hold stop button till display flashes, then press start or stop button to set over-voltage value.
Restore to factory settings:
Press and hold start and stop button together till it
displays 888 to restore factory settings.

Note: When setting, if start voltage cannot be adjusted, you can adjust stop voltage first. This is not a circuit problem or program fault.

Package Includes:

1 x Protection Board


Ochrana akumulátoru aku baterie baterii podpětí


Přidat do košíku:

  • Kód: 100066
  • 15 Balení skladem

Zeptat se na zboží

Tento produkt byl přidán dne Pátek 24. říjen 2008.

Prohlášení: Ačkoliv se zde snažíme poskytovat co nejpřesnější informace o zboží, akceptujte prosím případné námi nezaviněné změny sortimentu, jeho konfiguraci apod. Pokud námi vystavené informace nebudou vyjadřovat aktuální stav nabídky, budete neprodleně informováni.
Vaše IP adresa je: 44.222.104.49
Copyright © 2024 ISPshop. Powered by Zen Cart
Nejprodávanější produkty: RouterBoard, RouterBoard RB411, RouterBoard 433AH, RouterBoard 600A, Anténa, Anténa sektorová, Anténa parabolická, Anténa Dcom, Karta miniPCI CM9 2,4/5GHz, VOiP, WiFi Anténa, WiFi router, Shop EMOS - satelity